APC Smart-UPS 2200VA LCD 230V, SMT2200I
Price Includes VAT
APC Smart-UPS 2200VA LCD 230V, SMT2200I
Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
● Cold-start capable
Provides temporary battery power when the utility power is out.
● Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
● Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
● High online efficiency
Reduces utlility costs, generates less heat.
● Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
● Predictive replace battery date
Dy namically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
● Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
● Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.
● Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
● SmartSlot
Customize UPS capabilities with management cards.
● StruxureWare Central compatible
Enables centralized management via StruxureWare Central.
● Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
● Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
● Disconnected battery notification
Warns when a battery is not available to provide backup power.
● Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
● Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
● Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
●Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
● Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
● USB connectivity
Provides management of the UPS via a USB port (not available on all models).
● Serial connectivity
Provides management of the UPS via a serial port.
● Disconnected battery notification
Warns when a battery is not available to provide backup power.
● LED status indicators
Quickly understand unit and power status with visual indicators.
● Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
● Network manageable
Provides remote power management of the UPS over the network.
● Disconnected battery notification
Warns when a battery is not available to provide backup power.
● Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
● Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
● Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
● Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
● Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
● Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
● Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
● Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
● Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
● User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
● Resettable circuit breakers
Enables a quick recovery from overload events.
● USB connectivity
Provides management of the UPS via a USB port (not available on all models).
● LED status indicators
Quickly understand unit and power status with visual indicators.
● Serial connectivity
Provides management of the UPS via a serial port.
● Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
● Network manageable
Provides remote power management of the UPS over the network.
● Disconnected battery notification
Warns when a battery is not available to provide backup power.
● Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
● Resettable circuit breakers
Enables a quick recovery from overload events.
● Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
● Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
● User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
|
SPECIFICATIONS |
|
|
Brand |
APC |
|
Output Power |
1.98 KWatts |
|
Output Voltage |
230 Volts |
|
Input Frequency |
50/60 Hz +/- 3 Hz (auto sensing) |
|
Input Voltage Range |
160 - 286 V |
|
Interface Ports |
Smartslot |
|
Control Panel |
Multi-function LCD status and control console |
|
Battery Type |
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
|
Recharge Time |
3 hour(s) |
|
Audible Alarm |
Alarm when on battery : distinctive low battery alarm : configurable delays |
|
Approvals |
Approvals |
|
Dimensions |
435 x 197 x 544 mm |
|
Weight in Kg |
48.80 |
|
Color |
Black |